COMBINED C*TOR -PREPARATOR
聯合整地機
Mod. FAST 300/SI + DSH/ RF
型號：“快捷” 300/SI + DSH/ RF
Combined mounted implement for soil working and seeding bed preparation: 7 shanks c*tor, double independent discs rows and rear roller.
專業為耕整地作業而設計的全懸掛機具-一次作業即可達到播種要求：7個深松齒，雙排獨立作業的圓盤犁和尾部鎮壓輥
Technical details :
技術參數
§ Shanks working depth ……………………25/45cm
§ 深松深度
§ Discs working depth.……………………8/10 cm
§ 圓盤犁片作業深度
§ Working width ………………………….…..300cm
§ 作業寬度
§ Under frame clearance…………………………80cm
§ 地隙
§ Discs diameter ……………………………610mm
§ 圓盤犁片直徑
§ Discs distance …………………………………44cm
§ 犁片之間的距離
§ N. 7 shanks with wings
§ 7個深松齒都帶有翼型送土刀
§ N.2 cover row discs
§ 兩個合墑圓盤
§ Total weight ………………………（1265+850+455） 2550Kg
§ 總重量
§ Required Horse Power …………………………..…180/220HP
§ 要求的配套的動力
§ Options: shank’s wings.
§ 選裝件：深松齒上翼型松土 刀
主要特性描述
§ Implement developed to save costs in working the soil （with one passage: deep soil breaking and soil preparation for seeding）.This combination allows a big reduction in the soil working costs, maintaining a complete soil preparation.
§ 此機具可以大大地降低耕整地的成本（一次作業使土地達到深松播種要求）。此聯合整地機不但能夠顯著降低整地作業費用，而且能夠一次完成土壤整地作業。
§ The c*tor shanks, instead of the plough, allow a decompaction, superficial and deep explosion of the soil. The c*tor shanks are fitted with hydro-pneumatic “NON-STOP” safety system. It’s available also the version with a shear bolt system on traction
§ 聯合整地機的深送齒，用來代替犁，它使得土壤表層振松，深度打碎。聯合整地機深松腿配備液壓-氣動聯合作用“不停車”安全系統。也可以選用拉伸安全螺栓。
§ The two independent discs row sections allow a good preparation and reversal of the soil together with a good mixing of superficial crust. The inter-row discs distance and their positioning with independent supports allow the soil preparation even in fields with a lot of crops residues. The regulation of the discs angle, by means of a mechanic or hydraulic device, avoids the residues accumulation.
§ 兩行獨立的圓盤犁部分使得淺層土壤能夠翻轉，初步變碎，而且充分混合。優化的原盤間距及他們獨立支撐的位置使得其適合在有大量作物殘茬地的作業。圓盤角度的調整可以通過機械或者液壓的方式實現，以避免作物殘茬在整地時起堆。
§ The rear roller makes the final preparation, the levelling and the working control depth.
§ 后部鎮壓輥作用是平地碎土，及調整作業深度。
§ Lateral covering row discs .
§ 側邊配有合墑圓盤犁片，起到將側逃的土塊擋回的作用。
§ Working speed of the c*tor: about 8/10 Km/h
§ 聯合整地機的作業速度：大約8-10公里/小時
§ The weight, the length and the position of the mass have been studied to guarantee the minimum weight possible. Hydraulic folding for road transportation.
