DEL/DEM定量給料機
系統概述
DEL/DEM定量給料機用于各種固體散裝物料的定量連續給料，鋼鐵、有色金屬、水泥和化工等行業中的定量給料.它具有精度高、可靠性高及長期穩定性好等特點。該設備能按預定的程序，根據設定的給料量自動調節皮帶轉速，使物料流量穩定于設定值，平穩連續地輸送物料。
應用領域
DEL/DEM定量給料機廣泛用于固體散裝物料的重量法連續給料與稱量。堅固的秤體設計適用于礦石、沙石、粘土、廢灰、原料、化工、飼料等物料的定量配料過程。
要結構特點：
◆ 精度高、長期穩定性好、可靠性高
◆ 的糾偏裝置，不會產生跑偏和隆起現象
◆ 結構特殊，給料量受皮帶張力影響極小
◆ 膠帶清掃器及時清除粘結物，避免皮重變化和皮帶損傷；
◆ 導料槽的使用可以有效防止物料散落
◆ 采用變頻技術，帶速調節范圍寬
主要性能參數：
1、系統精度：≤±0.5%
2、調速范圍：1：10
3、調速方式：變頻調速
4、工作方式：連續給料
5、使用環境：控制系統：-50~50℃；秤體：-30~50℃
相對濕度：≤90%
6、電源供電：~380VAC±15%；50Hz±0.5Hz；
7、給料能力：0~1200t/h
The DEL/DEM weighfeeder can be used in an extremely wide variety of ways for continuous gravimetric feeding, and it excels due to its high level of accuracy of ±0.5%. It is integrated into the DEL/DEM product family, with application-specific series to fit every need. TheDEL/DEM series weighfeeders are specialised for many applications and bulk materials with medium to high feed rates.
The “classic” multi-talent for medium to high feed rates. Typical applications for this weighfeeder include the feeding of chunky, granular bulk materials (clinker, gypsum, lump coal, etc.), kiln charging and the charging of raw and cement mills.
Solutions package:
A flatbelt conveyor optimised for precise weighing, a three-phase AC drive system with speed sensor, and integrated weighing sensors.
Quality features and design consistency
Reliability, accuracy and a consistent “less is more” design pay off time and time again: the measuring roller that is placed directly on two load cells and the mechatronics concept ensure stable, long-term feeding results. Lifetime lubrication of the bearings and a weighted belt tensioning system make the system remarkably low maintenance.
Further advantages:
Onsite or remote weighing system calibration is possible via PCs, local field offices or a host computer. The feed rate adjustment range is wide.
The main performance parameters:
1, the system accuracy: ≤ ± 0.5%
2, Speed ??range: 1:10
3, Speed ??mode: Variable Speed
4, Operating mode: continuous feeding
5, the use of the environment: The control system: -50 ~ 50 ℃; scale body: -30 ~ 50 ℃
Relative humidity: ≤ 90%
6, power supply: ~ 380VAC ± 15%; 50Hz ± 0.5Hz;
