LWKK^®無功補償低壓濾波電抗器

LWKK^® Reactive Power Compensation LowVoltage Filter Reactor  

在用電器飛速發展進步的情況下，各種電力電子裝置在電力系統、工業、交通及家庭中的應用也日益廣泛，諧波的存在和對電力系統的影響變得更加普遍和嚴重，無功補償產品中的電力電容器已經逐漸不適合單獨使用在各類場合，電容器和供電系統的阻抗之間會產生的并聯諧振會造成諧波電流的嚴重放大，濾波電抗器的加裝，可以在選配合適電抗率以后，電容器電抗器組合可吸收對應固定次數諧波電流30%到50%左右。防止并聯諧振及諧波電流流入電容器，避免諧波電流發生放大，對整個電力系統起到一定凈化作用。

LWKK^®濾波電抗器采用H級銅線，提供高線性度，高過載耐受，低損耗。優質樹脂絕緣材料真空浸漬，保證耐壓可靠，優秀絕緣性能，低噪音，長壽命。專業的氣隙數量和位置的設計，提供相對較低的線圈損耗，整體結構牢固，減少了工作時的噪音產生。過溫度保護設計，135℃斷開，90℃復通，在電抗器內部溫度超過設計溫度時提供可靠的自動退出運行功能。

With the rapiddevelopment and progress of electrical appliances, various power electronicdevices are increasingly used in the power system, industry, transportation andhome applications, and the existence of harmonics and the impact on the powersystem become more common and serious. The power capacity in the reactivecompensation product has been gradually not suitable for use in variousoccasions separately, because the parallel resonance generated betweenimpedances of capacitor and power supply system will cause a seriousamplification in harmonic current. With the filter reactor used and with the appropriatereactance rate selected, the combination of capacitor and reactor will absorbup to about 30% to 50% fixed number of harmonic current. This prevents parallelresonance and harmonic current from flowing into the capacity to prevent theamplification of harmonic current, playing a role in purification for theentire power system.

LWKK^®filter reactors adopt H-class copper wire, providing high linearity, withstandvoltage under high overload, and low loss. High-quality resin insulationmaterial is vacuum impregnated, to ensure the reliable withstａnd voltage andexcellent insulation performance, low noise and long life. The professionaldesign of number of position of air gaps provides the relatively low coil loss and solid overall structure, to minimize the noise generated in the operation. Withover-temperature protection design, the power is off at 135℃ａnd on at 90℃, providinga reliable automatic exit function when the internal temperature of the reactorexceeds the design temperature.

技術參數Technical parameters

額定電壓：230V~690V

Rated voltage:230V ~ 690V

額定頻率：50/60Hz

Ratedfrequency: 50 / 60Hz

耐壓試驗：50Hz，3KV，60S

Voltagewithstａnd test: 50Hz, 3KV, 60S

線性度：1.8~2.5In

Linearity: 1.8~ 2.5In

電感誤差：0/＋5%

Inductanceerror: 0 / + 5%

阻抗系數：5%~14%

Impedance factor:5% to 14%

絕緣等級：H級

Insulationclass: H grade

結構：單、三相，鐵芯干式，多氣隙

Structure:single phase, three-phase, iron core dry, multiple air gaps

線圈材料：銅

Coil material:copper

溫控動作設計：135℃，常閉，一般250VCA，5A

Temperaturecontrol action design: 135 ℃,normally closed, generally 250VCA, 5A

出線方式：銅端子

Outlet way:copper terminal

防護級別：IP00 屋內

Protectionlevel: IP00 indoor

工作環境溫度：-25~＋50℃

Workingenvironment temperature: -25 ~ +50 ℃

海拔≤2000m

Altitude ≤ 2000m

制造標準：EN60076-6，EN61558-2-20

Manufacturingstandards: EN60076-6, EN61558-2-20

安裝：柜內安裝時，電抗器之間水平間距需＞30mm

Installation: forinstallation in the cabinet, the horizontal spacing between the reactors is >30mm

儲存條件：  干燥、陰涼、通風條件好，防止潮濕、腐蝕性化學品及粉塵等污染。儲存溫度應在-40℃~+75℃，并應確保儲存條件持續穩定，定期檢查。

Storage conditions: dry, cool, good ventilation conditions, toprevent moisture, corrosive chemicals and dust pollution. Storage temperatureshould be -40 ℃ ~ +75 ℃,ａnd storage conditions shall be always stable and checked regularly.

使用維護：  每月檢查電抗器接線端子連接牢固度及產品工作溫度，每年檢查使用現場的清潔狀況。

Useａnd maintenance:     check the reactorconnection terminal for firm connection and product operating temperaturemonthly; check the surrounding cleanliness at the site yearly.

型號說明：Model description

LWKK02-3-30-480-7%

LWKK：德萊維諾^®無功補償系列產品DELAVEENO^® reactive power compensation series product

02：無功補償低壓濾波電抗器Reactive power compensation low voltage filterreactor

3：三相，1為單相Three phase, 1: singlephase

30：配30Kvar的電容器With30Kvar capacitor

480：480V額定電壓480V ratedvoltage

7%：7%電抗率，另有5.67%、14%備選  7% reactance rate, with 5.67% and 14% ratesprovided

型號參數表Model and parameters table