Powerful and efficient performance – that is what the Enduro/Enduro Pro offers. The machine can operate at high forward speeds whilst maintaining a consistent working depth.

For today’s modern farms, the demands for c*tion have changed. Tight time slots have to be balanced with higher machine performance. Restricted crop rotations call for an adaption in technology that accomplishes all requirements of modern crop c*tion. Kvernelａnd proposes different configurations depending on the conditions of use:

The Enduro/Enduro Pro with a well-organised tine arrangement over 3 rows of tines has been designed to ensure mixing and intensive c*tion even with long residues. The tine spacing is 285mm on rigid and 270mm/275mm on the folding versions; the tine position has been optimised to ensure a smooth flow and an optimum mixing of the soil.

On Enduro Pro a maximum working depth of 35cm is possible (30cm on Enduro). The 320mm bolted wings, also available as Knock-on, completely cut the entire working width even when the machine is adjusted for shallow work. The high inter-row clearance of 750mm and the high underbeam clearance of 870mm ensure blockage-free operation under any conditions (maize, sunflower, wheat, oil seed rape stubbles or big intermediate crops).

Advantages:

• Full cutting system (FCS)
• Perfect mixing and levelling
• Low pulling force needed
• Wide range of rollers
• Reduced maintenance
• Stone protection

Technical Information Enduro (Depth adjustment by spacers)

Technical Information Enduro Pro (Depth adjustment hydraulic on-go)