大型除濕干燥機系統:

DDS大型除濕干燥機系統應用於塑膠使用大且露點要求低的場合。本公司制造的大型除濕干燥系統用於處理PET原料時可達800kg/h。該系統主要包含每小時干燥風量可以達到4000m3的蜂巢轉輪式除濕機及容料量高達8.000L（於裝載PET時的有效重量為6.400kg）的保溫式干燥料桶，經由轉輪除濕機處理過后的干燥原料最終含水率可以達到0.004%以下。

Large dehumidifying drying system

When you need to use large quantity of plastic and lower dew-point, you should choose DDS series large dehumidifying drying systems.

DDS series' capacity can reach 8000kg/h. This system includes honeycomb rotor dehumidier(8000m3/h) and insulation hopper

(10000L or 8000kg PET). After treatment, the highest rate of dry raw material can reach the nal moisture content below 0.004%.