產品特性Features：

1、適用于變頻噴油螺桿空氣壓縮機；Application: Frequency Inverter Oil-injected Screw Compressor

2、有停機主機吸氣口壓力控制放空和電磁閥控制放空兩種方式供選擇；Release Mode: Controlled by Air-end Suction Port Pressure at Shutdown or by Solenoid Valve

3、全系進氣閥采用重錘式止回結構，壓損小，在緊急停機的工況下，也不會噴油；Intake valve has hammer type check structure of low pressure loss to prevent oil injection through the compressor at shutdown.

4、的泄放流道方向，泄放時氣流不會沖刷止回閥板；Unique discharge flow channel direction leads airflow not to wash check valve plate during discharging.

5、進氣閥集成泄放閥、電磁閥（電控方式），安裝方便、快捷。Integration of discharge valve and electric control solenoid valve makes the intake valve install easily and quickly.

技術參數：Technic Data

型號說明：Model Description

RH - 50 BE - ODE - AC24 - UL

系列代號 通徑 D：主機吸氣口控制泄放

BE：電磁閥控制泄放 ODE：電磁閥品牌 空白：AC220V 50Hz 空白：CE認證 CE Certificate

AC110：AC110V 50Hz UL：UL認證 UL Certificate

AC24：AC24V 50Hz

DC24：DC24V

系列代號Series

通徑Nominal Diameter

D：主機吸氣口控制泄放 Air-end Suction Port Pressure Control Discharging

BE：電磁閥控制泄放 Solenoid Valve Control

ODE：電磁閥品牌 Brａnd of Solenoid Valve

主要安裝尺寸：Installation Dimension

噴油螺桿空壓機進氣閥Intake Valve for Oil-injected Screw Compressor

產品特性Features：

1、適用于工頻、變頻噴油螺桿空氣壓縮機；Application: Power Frequency and Frequency Inverter Oil-injected Screw Compressor

2、屬常閉式進氣閥，有控制壓力信號輸入，進氣閥開啟；It’s N/C type and will open in response to a control pressure signal.

3、全系進氣閥采用重錘式止回結構，壓損小，在緊急停機的工況下，也不會噴油；Intake valve has hammer type check structure of low pressure loss to prevent oil injection through the compressor at shutdown.

4、進氣閥控制氣缸根據螺桿空壓機工況自主設計，正常動作壽命＞100萬次；Self-design cylinder according to screw compressor working condition is at least one million standard operating cycles.

5、蝶閥閥桿與閥體配合處設計有防塵、防振圈，可有效防止振動引起的磨損；Design of dust ring and shockproof ring between butterfly valve stem and valve body can effectively prevent abrasion caused by vibration.

5、進氣閥集成泄放閥、反比例閥，標配附件：電磁閥與過濾器。Discharge valve, proportional valve, solenoid valve and drain filter integrate an intake valve.

技術參數：Technic Data