噴漆廢氣產生于工件涂裝的噴漆工作臺，高壓空氣射出的油漆大部分留在工件上，其它的隨著廢氣帶出，形成漆霧粉塵。這些粉塵含量不高，粒徑較小，絕大部分在10μm以下，箱體外部的漆霧在風機的吸力下進入漆霧凈化處理箱，氣液分離器進行氣水分離，分離后向箱內行走，在行走的過程中，遇到多級過濾板,漆霧與過濾板進行*飽和接觸，顆粒狀塵霧被過濾板吸附，余下的干凈尾氣通過網狀過濾器過濾后，再進入活性炭吸附凈化箱，活性炭凈化箱是利用高效吸附材料活性炭吸附有機氣體能力強的優點來凈化空氣的。活性炭凈化箱分進風、活性炭過濾段和出風段組成，有機廢氣從過風口進入箱體，凈化后的達標尾氣在通風機吸力下排向大氣。
The paint exhaust gas is generated on the painting workbench of the workpiece coating. Most of the paint sprayed by the high-pressure air remains on the workpiece，ａnd the other is carried out with the exhaust gas to form the paint mist dust. The dust content is not high， the particle size is small， and mostof them are below 10μm. The paint mist outside the box enters the paint mist purification treatment box under the suction of the fan, and the gas-I iquid
separator separates the gas and water, and separates into the box. Walking， in the process of walking, encounter multi-stage filter plate, the paint mist iscomp letely saturated with the filter plate, the granular dust mist is adsorbed by the filter plate, and the remaining clean exhaust gas is filtered thr oughthe mesh filter, and then enters the activated carbon adsorption purification. Box， activated carbon purification box is the use of high-efficiency adsorp-tion material act ivated carbon adsorption of organic gas has the advantage of strong ability to purify the air. The activated carbon purification tank is
composed of air inlet, activated carbon filter section and outlet section. The organic waste gas enters the tank from the air inlet, and the purified exhaustgas is discharged to the atmosphere under the suction of the fan.
