產品型號：JSN1901

產品名稱：發動機冷卻液模擬使用腐蝕測定器(JSN1901)

產品說明：

JSN1901發動機冷卻液模擬使用腐蝕測定器

一、符合SH/T0088、ASTMD2570標準

二、主要技術參數：

液體流速： 1.3～1.6L/s

控制溫度： 88℃±3℃       

運行時間： 1064h

加熱功率： 2.6kw 

電機功率:  2.2KW

壓力指示:  80～103Kpa

整機功率： 4.8kw

工作電源： AC380V±10% 50HZ

外形尺寸： 1370×670×1380=長×寬×高（mm）

整機重量： 180Kg

三、性能及特點

1、儀器采用防爆電機并裝有超溫保護,儲存器蓋上面裝有安全閥,能確保儀器運行的安全。

2、儀器采用活塞排量為1.6～5.0L的汽車水泵和散熱水箱，臺面用不銹鋼制作,緊固件采用不銹鋼螺絲,易拆卸不易生銹。

3、儀器采用進口數顯溫度控制器，PID跟蹤控溫精度高。

4、儀器采用渦輪流量計傳感器（本產品依據GB/T9246-1999機械行業標準），計量準確直觀。

5、儀器采用智能數顯計時器, 計時準確,中途停機后能顯示實際運行時間。

JSN1901 engine coolant is simulated using a corrosion detector

One, accord with SH/T0088, ASTMD2570 standard

Ii. Main Technical parameters:

Liquid flow rate: 1.3 ~ 1.6l /s

Control temperature: 88℃±3℃

Running time: 1064h

Heating power: 2.6KW

Motor power: 2.2KW

Pressure indication: 80 ~ 103Kpa

Machine power: 4.8KW

Power supply: AC380V±10% 50HZ

Dimensions: 1370×670×1380= Length × width × height (mm)

Machine weight: 180Kg

Iii. Performance and Characteristics

1. The instrument adopts explosion-proof motor and is equipped with overtemperature protection. Safety valve is installed on the cover of the container to ensure the safety of the instrument.

2. The instrument adopts the auto water pump and cooling water tank with piston displacement of 1.6 ~ 5.0L, the table is made of stainless steel, and the fastener is made of stainless steel screws, which are easy to be removed and not easy to rust.

3, the instrument adopts imported digital display temperature controller, PID tracking temperature control precision is high.

4. The instrument adopts turbine flowmeter sensor (this product is based on GB/T9246-1999 mechanical industry standard), and the measurement is accurate and intuitive.

5. The instrument adopts intelligent digital display timer, which is accurate and can display the actual running time after stopping midway.