JSN1401石油瀝青組分測定器

一、符合SH/T0509標準

二、主要技術參數：

真空烘箱：

控溫范圍：105～110℃          加熱功率：1.2 KW

加熱方式：電阻絲加熱          控溫方式：數顯溫控儀

真 空 度：93±1Kpa（700±10mmHg）         

抽氣控制：電接點壓力表

馬福爐：

控溫范圍：常溫～800℃          控溫精度：±25℃

控溫方式：數顯溫控器           加熱方式：電阻絲加熱

加熱功率：2.2 KW            

爐膛尺寸：120×200×80 mm （長×寬×高）

超級恒溫浴：

    控溫范圍：常溫～60℃           控溫精度：±1℃

  控溫方式：數顯溫控儀            攪拌方式：循環泵

  加熱功率：1.2 KW                           

三、性能及特點：

1、采用數顯溫控儀控溫，顯示直觀，控溫準確；

2、采用鎳電阻絲加熱，升溫速度快，使用壽命長；

3、采用數顯時間計時器計時，走時準確，能設置定時報警；

4、采用進口材料制作，表面經過噴塑處理，不生銹；

5、結構緊湊，裝有超溫自保裝置，使用安全可靠。

JSN1401 petroleum asphalt component tester

I. Comply with SH/T0509 standard

Ii. Main Technical parameters:

Vacuum oven:

Temperature control range: 105 ~ 110℃ Heating power: 1.2 KW

Heating mode: Resistance wire heating temperature control mode: digital display temperature controller

Accuracy: 93±1Kpa (700±10mmHg)

Extraction control: electric contact pressure gauge

Ma Fulu:

Temperature control range: normal temperature ~ 800℃ Temperature control accuracy: ±25℃

Temperature control mode: Digital display thermostat Heating mode: resistance wire heating

Heating power: 2.2KW

Furnace size: 120×200×80 mm (length × width × height)

Super thermostatic bath:

Temperature control range: normal temperature ~ 60℃ Temperature control accuracy: ±1℃

Temperature control mode: Digital display temperature controller Stirring mode: circulating pump

Heating power: 1.2KW

Iii. Performance and Characteristics:

1. Adopt digital display temperature controller to control temperature, which is intuitive and accurate;

2. Nickel resistance wire is used for heating with fast heating speed and long service life;

3. Digital display time timer is used to time the time accurately, and timing alarm can be set;

4, using imported materials, the surface after plastic spray treatment, not rust;

5. Compact structure, equipped with over-temperature self-protection device, safe and reliable use.