JSN0401石油瀝青薄膜烘箱

一、符合GB/T5304、JTG E20-2011、JTJ/T0609標準

二、主要技術參數：

控制溫度：180±0.1℃

控溫方式：數顯溫控器自動控溫

加熱功率：≤1.8kw

升溫時間：≤60min

轉盤速度：5.5±1r/min

內腔尺寸：450×400×400=長×寬×高（mm）

外形尺寸：550×520×880=長×寬×高（mm）

工作電源：AC220V±10％ 50HZ

三、性能及特點：

1、內膽采用不銹鋼板制造，美觀耐用；

2、采用數顯溫控器自動控溫，具有控溫準確，顯示直觀；

3、采用數顯計時器計時，顯示清晰直觀；

4、烘箱內腔裝有照明燈，試驗過程中只要打開照明開關，便可清晰觀察到試樣。

5、儀器配有雙層玻璃門，不必打開箱門，隨時可以直接讀取溫度計的讀數。

6、烘箱采用空氣自然對流或通風，為使箱內換氣均勻，在儀器頂部和底部分別設有空氣入口和出口，而且頂部設有雙調節風門，可以隨時調節風門的空氣對流。

7、溫度可開高為180℃，精度比標準要求更高，實際為±1℃。

JSN0401 oil pitch film oven

1. It conforms to GB/T5304, JTG E20-2011 and JTJ/T0609 standards

Ii. Main Technical parameters:

Control temperature: 180±0.1℃

Temperature control mode: Digital display thermostat automatically controls temperature

Heating power: ≤ 1.8kW

Heating time: ≤60min

Rotating speed: 5.5±1r/min

Internal cavity size: 450×400×400= Length × width × height (mm)

Dimensions: 550×520×880= Length × width × height (mm)

Power supply: AC220V± 10% 50HZ

Iii. Performance and Characteristics:

1. The inner bladder is made of stainless steel plate, beautiful and durable;

2. Adopt digital display thermostat to automatically control temperature, with accurate temperature control and intuitive display;

3. Timing with digital display timer, clear and intuitive display;

4. The chamber of the oven is equipped with a lighting lamp. During the test, the sample can be clearly observed as long as the lighting switch is turned on.

5, the instrument is equipped with double glass door, do not have to open the door, you can directly read the thermometer at any time.

6. The oven adopts natural air convection or ventilation. In order to make even air change in the oven, the instrument has air inlet and outlet at the top and bottom respectively.

7. The temperature can be opened up to 180 ° C, and the accuracy is higher than the standard requirements, actually ±1 ° C.