產品型號：JSY0202

產品名稱：液化石油氣密度測定器JSY0202

產品說明：

JSY0202液化石油氣密度測定器（壓力密度計法）

一、符合SH/T0221、ISO3993標準

二、主要技術參數：

試驗溫度：15℃或20℃          

控溫精度：±0.2℃

控溫方式：數顯溫控儀自動控溫   

功   率： 1.3 KW

壓力指示：指針壓力表顯示  

致冷方式：進口壓縮機致冷

工作電源： AC220V±10%  50HZ

三、性能及特點：

1、采用進口數顯溫控儀控制恒溫浴溫度，控制精度高，溫度顯示直觀。

2、恒溫浴采用電熱管加熱和進口壓縮機致冷方式控制溫度，既能升溫又能降溫，確保恒溫浴溫度能恒定在15℃或20℃。

3、密度計圓筒和恒溫浴前端均用有機玻璃制成，恒溫浴后有照明燈，在恒溫浴水浴中就能觀察到圓筒內密度計讀數，方便操作。

4、采用磁力循環泵循環攪拌，確保恒溫浴內溫度均勻，以及恒溫?zé)o振動。

JSY0202 Liquefied Petroleum gas densitometer (pressure densitometer method)

I. It conforms to SH/T0221 and ISO3993 standards

Ii. Main Technical parameters:

Test temperature: 15℃ or 20℃

Temperature control accuracy: ±0.2℃

Temperature control mode: Digital display temperature controller automatically controls temperature

Power rate: 1.3kW

Pressure indicator: pointer pressure gauge display

Refrigeration mode: refrigeration by imported compressor

Power supply: AC220V±10% 50HZ

Iii. Performance and Characteristics:

1. Adopt imported digital display temperature controller to control the temperature of constant temperature bath, with high control precision and intuitive temperature display.

2. The constant temperature bath adopts electric heat pipe heating and import compressor cooling mode to control the temperature, which can both heat up and cool down, ensuring that the constant temperature of the constant temperature bath can be kept at 15℃ or 20℃.

3, the densitometer cylinder and the front end of the constant temperature bath are made of plexiglass, after the constant temperature bath light, in the constant temperature bath water bath can be observed in the cylinder densitometer reading, easy to operate.

4. Magnetic circulating pump is adopted to circulate and stir to ensure uniform temperature in constant temperature bath and no vibration at constant temperature.