NBT-L266
| Model | NBT-L-266 | |
| Central wavelength (nm) | 266±1 | |
| Output average power (mW) | 1~20 | |
| Transverse mode | Near TEM00 | |
| Operating mode | Frequency conversion of Q-switched pulsed laser | |
| Single pulse energy (µJ) | 0.1~5 | |
| Pulse duration (ns) | ~5 | |
| Peak power (W) | 20~1000 | |
| Rep. rate (kHz) | Controllable | Fixed rep. rate, such as 1k, 2k, 3k, 4kHz, with stable laser pulses emitting (stable pulse energy, peak, duration and period). |
| Different rep. rate in the range of 1kHz-4kHz can be obtained by input an external TTL signal. | ||
| Uncontrollable | Undefined rep. rate among 5k-7kHz and unstable laser pulse emitting. Suitable for the applications only needing high peak power pulses. | |
| Average power (mW) | Average power (mW) = Single pulse energy (µJ) * Rep. rate (kHz) | |
| Ave power stability (over 4 hours) | <5%, <10% | |
| Warm-up time (minutes) | <10 | |
| M2 factor | <1. 5 | |
| Spectral purity | >99% | |
| Beam parameters | Elliptical (4:1), Beam spot ~2mm | |
| Polarization ratio | >100:1 | |
| Beam height from base plate (mm) | 45 | |
| Operating temperature (℃) | 10~35 | |
| Power supply (90-264VAC) | PSU-H-FDA | |
| Expected lifetime (hours) | 5000 | |
| Warranty period | 1 year | |
| Remarks | Please Note: because of the Walk-off effect of Nonlinear crystals, the beam quality of UV laser is not so good as that of 1064/532nm laser. | |
