聚硫密封膠（英）
聚硫密封膠是以液態聚硫橡膠為主體材料，配合以增粘樹脂、硫化劑、促進劑、補強劑等制成的密封膠。此類密封膠具有優良的耐燃油、液壓油、水和各種化學藥品性能以及耐熱和耐大氣老化性能。
Polysulfide sealant is liquid polysulfide rubber as the main materials, cooperate with viscosity-enhancing resin, curing agent, promoter, such as reinforcing agent made of sealant. Such sealant has excellent resistance to oil, hydraulic oil, water, and various chemical properties and heat resistance and atmospheric aging resistance performance.
一般為可硫化型。按組分可分為雙組分(或三組分)和單組分型。其加工采用預混-研磨-灌裝的工藝方法。聚硫密封膠廣泛用于土木建筑、汽車制造等行業作為嵌縫、密封材料，還常用于各類油箱、燃料罐、機械、復合玻璃的密封。
聚硫密封膠（英）
As a general rule, be can sulfide type. According to the component can be divided into two components (or three) and single component type. The processing of the premixed - grinding - filling process. Polysulfide sealant is widely used in civil construction, auto manufacturing and other industries as sealing, sealing material, also used in all kinds of fuel tanks, fuel tanks, aviation machinery, composite glass sealing.
使用方法
1、手工施工時，將 A 、 B 兩組份按比例( 10:1 )稱量并用油灰刀混合均勻，填入密封槽中，壓實、填平、除去多余的膠液。要注意用力沿一個方向反復刮涂，防止大量氣泡混入膠內。
2、機械施工時，是由自動計量和混合裝置( 10:1 )完成混膠，經手動注槍或全自動噴膠機來控制涂膠量和涂膠速度。用注膠槍施工時要報持槍嘴沿一個方向勻速地移動，確保填滿膠料防止移動過快或往復而產生氣泡。
Method of use
1, the manual construction, will be A, B two components (10:1) weighing in proportion with putty knife mixing, fill in the seal groove, compaction, bridge, remove excess glue solution. Attention should be paid to force along a direction repeatedly coating, prevent a lot of bubble mixed with glue.
2, mechanical construction, is completed by automatic metering and mixing device (10:1) rubber mixing, the injection gun manually or automatic glue machine to control the amount of glue and glue speed. With note glue gun construction want to report the mouth move at a constant speed along a direction, to ensure that filled with rubber to prevent moving too fast, or reciprocating and bubble generation.
衡水益豐科技有限公司專業生產聚硫密封膠，雙組份聚硫密封膠防水效果好，質量保證，水泥色雙組份聚硫密封膠實用性高，*直銷雙組份聚硫密封膠，：，（同號）
