金盾沒有氣味無異味kd-888快干膠> kd-888 快干膠是專為無氣味結合的要求和高強度單組分的研究與開發膠、高性能、抗老化性能優異，非常適合連續生產線。
KD-888 quick-drying glue is designed for the combination of non-odor requirements and high-strength single-component research and development of special plastic, high performance, excellent anti-aging performance, very suitable for continuous production line.
kd-888無味快干膠：金屬，塑料，陶瓷，粘結瓷、工藝品、瓷磚、大理石、花崗巖、ivory石、水晶石、木材、橡膠、儀表、電器、皮革等多種產品，廣泛應用于五金、家具、陶瓷、機械、顯示、顯示電子、儀器、汽車、造船、紡織、建筑、化工
Wood, rubber, instrumentation, electrical appliances, leather and other products, widely used in hardware, metal, plastic, ceramic, handicrafts, tiles, marble, granite, ivory stone, crystal stone, wood, rubber, , Furniture, ceramics, machinery, display, display electronics, instrumentation, automotive, shipbuilding, textile, construction, chemical, aerospace and medical adhesives.
說明> 1、PP、硅膠、PE、TPU、POM等惰性塑料和金屬表面處理劑，需要塑料表面擦一遍，用kd-770處理，提高膠料的表面惰性材料吸收性能；<br / > 2、處理劑揮發（一般在10秒的粘接材料，結束后60分鐘，隨著時間的推移，需要重新處理）再涂上適當的（粘結面積小，可在套筒前端的進膠瓶針或導管，以控制膠量）kd-888膠水；> 3，室溫下為二十秒可以初步固定。30分鐘至24小時的使用強度，*貼合！4、ABS、PS、PC、PPS、PA、GA等塑料和金屬粘接，無需加工，一般在6-8秒定位，5分鐘左右，即能達到很強的強度，2小時即可投入使用。
1, PP, silicone, PE, TPU, POM and other inert plastic and metal surface treatment agent, the need for plastic surface wipe again, with kd-770 treatment to improve the surface of the material inertia material absorption performance; <br /> 2, (Usually over 10 minutes after the end of the sleeve) Catheter to control the amount of glue) kd-888 glue;> 3, at room temperature for 20 seconds can be initially fixed. 30 minutes to 24 hours of use of strength, fully fit! 4, ABS, PS, PC, PPS, PA, GA and other plastic and metal bonding, no processing, generally 6-8 seconds positioning, 5 minutes or so, that can achieve a strong strength, 2 hours can be put into use.
