Poly VENT系列產品用于過濾空氣,既保護容器內樣品免受外部污染,又保護環境免受內部樣品的污染。濾器為聚丙烯外殼,有一個孔徑為0.2μm的聚四氟乙烯膜,能適合不同容量和空氣流速要求。
特性
*在嚴格的清潔環境中生產,具有生物安全性
*復合設計,用一個小的體積來提供一個很大的有效過濾面積
*可雙向通氣和進行高壓滅菌
應用
*作通氣口和隔離使用,特別是用在生物技術,醫藥,食品和釀酒業
*為生長環境滅菌通氣和排氣
*藥物分析
*食品和酒類分析-包括保存,裝運和配料容器
*為恒溫箱,高壓釜,EtO滅菌器和發酵器作空氣隔離
技術參數-PolyVENT/SteriVENT囊式通氣口濾器
外殼 | polypropylene |
過濾介質 | PTFE(polyetrafluoroethylene) |
孔徑 | 0.2μm |
出口 | On inlet |
支撐物 | polypropylene |
封口 | Heat-fused |
zui大壓力 | 29 psi(2bar)-Forward direction |
水壓 | 29 psi(2 bar)/15 seconds |
流向 | supported bi-directionally.certain applications may require orientation,i.e.vents.the pressure rating is not the same both directions.reverse flow only for low-pressure applications. |
安全性 | materials pass USP Class VI |
滅菌 | can be autoclaved at 121℃ for 20 minutues(maximum 132℃)。Multiple autoclave cycles are possible.however,the responsibility for reuse is with the operator,the device should be protected from cross contamination.an integrity test should be performed after autoclaving.compatible with EtO sterilization. |
無熱源 | LAL total,non-reactive |
過濾面積 | 36 mm capsule:500cm2 75mm capsule:1000cm2 150mm:2000 cm2 50mm disc:16cm2 25mm disc:4cm2 |
訂貨信息- PolyVENT/SteriVENT囊式通氣口濾器
目錄號 | 膜1 | 孔徑(μm) | 外殼 | 接口* | 數量/包裝 | |
進口 | 出口 | |||||
PolyVENT/SteriVENT 36 | ||||||
6713-5036 | PTFE | 0.2 | capsule | SB | SB | 1 |
2103 | PTFE | 0.2 | capsule | 1/2”SB | 1/2”SB | 1 |
PolyVENT/SteriVENT 75 | ||||||
6713-1075 | PTFE | 0.2 | capsule | 1/2”SB | 1/2”SB | 1 |
PolyVENT/SteriVENT 150 | ||||||
2107 | PTFE | 0.2 | capsule | 1/2”SB | 1/2”SB | 1 |
2108 | PTFE | 0.2 | capsule | 1/2”Sanitary | 1/2”Sanitary | 1 |
PolyVENT discs | ||||||
6713-0425 | PTFE | 0.2 | 25mm disc | SB | SB | 50 |
6713-1650 | PTFE | 0.2 | 50mm disc | SB | SB | 10 |
6713-1651 | PTFE | 0.2 | 50mm disc | SB | SB | 100 |
1PTFE-聚四氟乙烯
1/2SB-梯形配用10-2mm3/8”-1/2”軟管
*SB-梯形適合6-10mm1/4”-3/8”軟管
FNP-母式螺紋管