橡膠塑料薄膜電壓強度測試儀BDJC-50KV
Rubber plastic membrane voltage strength tester BDJC - 50 kv
橡膠塑料薄膜電壓強度測試儀BDJC-50KV主要配置：
1.主機一臺
2.（高精度滾珠絲杠，高強度光杠，中國臺灣精密電機及伺服系統）
3.高精度S 型傳感器一只（1000N）
4.拉伸夾具兩只（具體類型可按用戶試驗情況確定）
5.單片機控制器一個（液晶中文顯示）
Rubber plastic membrane voltage strength tester BDJC - 50 kv main configuration:
1. Host a
2. (high precision ball screw, high strength and light poles, Taiwan precision motors and servo system)
3. High precision a S type sensor (1000 n)
4. Drawing fixture two (as defined by the user test specific types can)
5. Single chip microcomputer controller a (liquid crystal display in Chinese)
BDJC-50KV技術參數：
1.測力精度：示值的±1％ （可選±0.5％）
2.測力分辨率：1/30000
3.試驗速度：0.05——500 mm/min
4.速度精度：示值的±1％ （可選±0.5％）
5.變形精度：±0.5％（FS）
6.有效拉伸空間：≥850 mm（具體尺寸也可按用戶要求擴展）
7.有效試驗寬度：400 mm 550 mm（具體尺寸也可按用戶要求擴展）
8.超載保護功能：超過額定負荷10％自動保護
9.試臺安全裝置：電子限位保護
10.試臺返回功能：試驗結束后自動或手動返回試驗初始位置
Rubber plastic membrane voltage strength tester BDJC - 50 kv technical parameters:
1. The force measurement accuracy: + / - 1% of the value (optional + / - 0.5%)
2. Strain resolution: 1/30000
3. The test speed: 0.05-500 mm/min
4. Speed accuracy: + / - 1% of the value (optional + / - 0.5%)
5. The deformation accuracy: plus or minus 0.5% (FS)
6. Effective tensile space: 850 mm or higher (specific size can also be expanded according to the requirements of customers)
7. Effective test width: 400 mm to 550 mm (specific size can also be expanded according to the requirements of customers)
8. The overload protection function: more than 10% of the rated load automatic protection
9. Try machine safety devices: electronic limit protection
10. Try a return function: test automatically or manually after the return to the initial position
BDJC-50KV注意事項：
●本儀器試驗過程中如空氣相對濕度大于70%，兩電極間空氣放電的距離會增加很多，所以試驗中請與儀器保持1.2米的距離。
●本儀器之控制計算機專為電壓擊穿試驗機設計，請勿隨意添加和刪除程序或移作它用。
●本公司保留對設備改進的權利，并不另行通知用戶。
注： 其它未盡事宜請，我們將竭誠為您服務。
Rubber plastic membrane voltage strength tester BDJC - 50 kv to note:
When the instrument test such as air relative humidity is more than 70%, in the process of air discharge distance between two electrodes increases a lot, so test instrument to keep a distance of 1.2 meters.
When the instrument is specially designed for the control of computer breakdown voltage tester design, please do not add and remove programs or for it.
The company reserves the right to equipment improvement, did not notice the user.
Note: other matters not mentioned herein, please contact us, we will serve you wholeheartedly.
：
