防爆檢修箱配電箱，防爆檢修插座箱，防爆檢修電源插座箱，防爆插座電源箱，防爆插座檢修箱，防爆檢修電源箱，防爆插座箱

訂貨須知

Scope of application:

1、適用于爆炸性氣體環境1區、2區；

1, applicable to the 2 District, 1 District, explosive gas environment;

2、適用于IIA、IIB級爆炸性氣體環境；

2, suitable for IIA, IIB explosive gas environment;

3、適用于溫度組別為T1-T6的環境；

3, apply to the temperature classes for T1-T6 environment;

4、適用于石油采煉、儲存、化工、醫藥、及軍事設施等爆炸性危險環境;

4, applicable to the petroleum production and refining, storage, chemical, pharmaceutical, military and military facilities and other explosive dangerous environment;

5、主要用于臨時作業或移動作業的電源分配；

5, mainly used for power distribution of temporary work or move operation;

6、本產品為多殼體拼裝結構。

6, this product is multi shell assembling structure.

防爆檢修電源箱，防爆插座箱產品特點

Product features

1、外殼采用鋁合金高壓鑄造成型，表面經拋丸后高壓靜電噴塑；

1, the shell adopts aluminium alloy high pressure casting forming, surface of high-pressure electrostatic pensu after blast;

2、采用模塊化設計，各回路可以自由組合，帶總開關產品內裝高分?jǐn)嘈⌒蛿嗦菲骰蛩軞嗦菲鳎?/p>

2, the use of modular design, the circuit can be combined freely, with a total switch products installed MCB or mccb;

3、可根據用戶要求增加漏電、過載、短路保護等功能；

3, can increase the leakage, overload, short circuit protection function according to user requirements;

4、多種規格的插座可供選擇；

Socket 4, a variety of specifications are available;

5、可根據用戶要求特殊制造；

5, according to user requirements special manufacturing;

∈產品性能特點：

Performance characteristics of ∈ products:

1、防爆電源插座箱為復合型防爆結構。元件腔采用隔爆型防爆結構，進、出線腔采用增安型防爆結構。各腔體之間采用模塊式組合，隔爆腔之間互不相通，減小了單個腔體的凈容積，從而消除了爆炸壓力重迭，增強了產品的防爆性能；各回路可以****選擇、拼裝；體積小，整齊、美觀，占用安裝現場空間較少；重量輕，安裝、維護方便。

1, explosion proof power socket box for the explosion-proof structure of the compound. The element cavity flameproof explosion-proof structure, into the outlet chamber, with increased safety explosion-proof structure. The cavity between the modular combination, between the flame-proof cavity are not communicated with each other, reducing the net volume of single cavity,thereby eliminating the explosion pressure overlap, enhanced the explosion-proof performance of products; the loop can be * * * *selection, assembly; small, neat, beautiful, occupy less space on the site installation; light weight, installation, easy maintenance.

2、本系列產品為鑄鋁合金外殼，鋁合金為ZL102符合國家標準。產品殼體采用燃油、高溫、恒溫一次壓鑄成型工藝，壓鑄產品表面光滑，外形美觀大方，金屬結構致密度高，外殼結構內部無氣泡、無砂眼，抗沖擊性能增強(鑄鋁合金的抗拉強度為原來的近2倍，硬度為原來的近1.5倍，密度比原來也有所增加)，產品外殼防爆性能好，產品上有壓制的*性防爆標志。

2, this series of products for the enclosure is made of casting aluminum alloy, aluminum alloy in line with national standards for ZL102. The shell of the product by a casting process of fuel, high temperature, constant temperature, casting products smooth surface, beautiful appearance, metal structure, high density, no bubble, no blisters shell structure, enhance the anti impact properties (tensile strength of cast aluminum alloy is nearly 2 times, the hardness is nearly 1.5 times, the original density than the original also increased), product shell good explosion proof, explosion-proof products are pressed on the permanent sign.

3、產品表面通過高速拋丸等系列工藝處理后，采用的高壓靜電噴塑工藝進行表面噴塑，并經全自動恒溫?zé)崽幚砹魉€工藝后，殼體表面形成的塑層附著力強，不易脫落，有效達到保護殼體的目的，提高了產品的防腐能力，且遠優于噴漆工藝。

3, the product surface by high-speed blast series process, using high voltage electrostatic spray process advanced surface spray,and the automatic constant temperature heat treatment process, the formation of surface of shell plastic layer adhesion, not easy to fall off, effectively protect the housing purposes, improve the ability of anti-corrosion products, and far better than the painting process.

4、隔爆型防爆結構的隔爆面滿足GB3836-2000國家標準，精度達6.3μm。

4, flameproof explosion-proof structure of flameproof surface can meet the national standard GB3836-2000, precision is up to 6.3μ M

5、產品外表面顏色為灰色，同時還有蘋果綠、白色、藍色、軍綠色等多種顏色可供用戶選擇，也可按用戶要求制作。

5, the product surface color to gray, and apple green, white, blue, green and other colors for customers to choose, also can be made according to user requirements.

6、所有外露緊固件均采用不銹鋼材質。

防爆插座箱，防爆檢修箱6, all the exposed fastening pieces are made of stainless steel material.

7、電纜進出線方向，可根據用戶要求做成上進上出、下進下出、上進下出、下進上出等多種形式。

7, a cable inlet and outlet direction, can be made according to user requirements on the mobility, lower in and out, under the upper lower, upper and other forms.

8、進出線口通常采用管螺紋，配置電纜夾緊密封裝置；也可根據用戶現場要求，制成公制螺紋、NPT等螺紋形式。

8, the inlet and outlet usually adopts the pipe thread, configuration cable clamping sealing device; can also be based on userrequirements at the scene, made of NPT metric thread, thread form.

9、鋼管、電纜布線均可。

9, pipe, cable wiring.

10、配電箱內部導線采用OT接線端子冷壓接，并穿有套管進行絕緣處理，接線端子采用帶防松瓦墊緊固，確保電氣性能的穩定性，接線端子上有明確的進出線編號或標識。

10, the internal wire distribution box with OT wiring terminal cold pressure welding, and wear casing insulation treatment,terminals with special anti sunwar mat fastening, ensure the stability of electrical performance, a number of clear out line orlabeling terminals.

11、配電箱內裝主要元件為正宗施耐德產品，(開關)小型斷路器為C65N系列(具有過載及短路保護功能)；交流接觸器為LC1系列，熱繼電器為LR2系列。其余元件如：指示燈、按鈕、儀表等元件，為我公司特制防爆元件，防爆性能及電氣性能可靠。

11, power distribution box main components for the authentic Schneider products, (switch) for C65N series miniature circuit breaker (with overload and short circuit protection function); for LC1 series AC contactor, thermal relay LR2 series. Other elementssuch as: lights, buttons, instrumentation and other components, as our special explosion-proof component, explosion-proofperformance and reliable electrical performance.

12、配電箱內裝元件、支路數可根據用戶要求配置；戶外的產品可根據用戶要求配置防雨罩。

12, power distribution box components, number of branches can be configured according to user requirements; outdoor productscan be configured according to user requirements rain cover.

13、配電箱安裝方式一般為掛式，特殊要求時可做成立式、座式或配電柜式。

13, distribution box installed by hanging, special requirements can be made into a vertical, seat type or power distribution cabinet.

14、電纜配置方式為：動力箱：輸入3P+N+PE/輸出3P+N+PE

14, the cable configuration mode: the power box: 3P+N+PE/ input output 3P+N+PE

照明箱：輸入3P+N+PE/輸出1P+N+PE

Lighting box: 3P+N+PE/ input output 1P+N+PE

15、本系列產品經鑄造、加工、裝配、檢驗等十余道工序，產品檢驗合格后才允許包裝出廠。

15, this series of products by casting, machining, assembly, testing and other more than ten processes, products after passing inspection allowed packaging factory.

16、本系列產品出廠時，隨機配有《使用說明書》、《保險卡》、《出廠合格證》、特殊元件的《使用說明書》等技術文件。

16, this series of products, random equipped with "instructions for use", "insurance card", "certificate", special components"instructions for use" and other technical documents.

17、本系列產品為木箱包裝，并嚴格按相關國家標準要求進行包裝出廠。

17, the series of products are the special wooden box packaging, and in strict accordance with the relevant national standards and requirements for packaging factory.

外形尺寸參考圖